Unit Converter

Convert Units

  1. Enter the desired value under the desired unit.
  2. Click the Calculate button.

The calculator will convert the value to each of the other units and display the results.

Add/Subtract

  1. Enter the desired value under the desired unit.
  2. Click on '+' OR '-'
  3. Enter another value.
  4. Repeat the steps 2 and 3.
  5. Click the Calculate button to see the results

Multiply/Divide

  1. Enter the desired value under the desired unit.
  2. Click on 'x' OR '/'
  3. Enter the multiplication/division factor
  4. Click the Calculate button to see the results

Clearing the Results

Click the "Reset" button to clear the results.

Angle Calculator

  1. Enter the known values of the sides or angles of the triangle.

    2. Note: You can enter either two sides OR one side and one angle.

  2. Click the Calculate button.

    3. The calculator will calculate the missing sides and angles.

Clearing the Results

Click the "Reset" button to clear the results.

Volume Calculator

  1. Select the type of footing.
  2. Enter the measurements in Feet and Inches of your pour.
  3. Click on the Calculate button.

The calculator will display the number of cubic feet and cubic yards of concrete that will be required.

It will also estimate the approximate number of 60 pound bags and 80 pound bags of pre-mix required.

Note:The calculation for pre-mix bags is based on : 60lb yields approx .45 cubic feet and 80lb yields approx. .60 cubic feet.

Adding the Results

Select the "Add" button if you want to add the results to the next set of calculations.

Clearing the Results

Click the "Reset" button to clear the results.